cockpit as350

Réalisation de structures / bases / cockpits ouverts ou fermés
Idées / Plans / Photos pour réaliser sa cabine

Re: cockpit as350

Messagede kev1 » Mar 6 Juin 2017 09:26

JacquesZ a écrit:
kev1 a écrit:Interface:
J'ai investi dans une BU0836x de Bodnar et une bbi32 . (Simple a utiliser, mais pas d’allumage de diode). Ça m'a permis de brancher presque tous les inter "importants".
Je suis juste déçu de ne pouvoir simuler le frein rotor et la vanne carbu dont j'ai fabriqué la réplique (prêt a brancher) mais que Dreamfoil n'a pas interfacé sur son appareil.
Kev1

Hello Kevin.
Je n'y connais rien en Hélicos, mais je suis allé voir le site de Dreamfoil labs.
À priori le frein de rotor est modélisé et le fonctionnement de la bille amélioré sur le Service Pack2.
Je ne sais pas si ça peut t'aider?
http://forums.x-plane.org/index.php?/forums/topic/86761-as350b3-sp2-work-in-progress/

Jacques


En effet, c'est ce que j'ai cru comprendre. Pour l'instant je n'ai pas trouvé comment se procurer la Sp2. Je croit qu'il faut contacter dreamfoil. je vais continuer mes recherches. merci
Dernière édition par kev1 le Mar 6 Juin 2017 19:02, édité 1 fois.
asus gamer portable/ intel core I7-4710HQ CPU 2.5Ghz / 16 Go RAM /wind 8.1/ Carte Geforce GTX860M/
kev1
 
Messages: 12
Inscription: 30/06/16

Re: cockpit as350

Messagede kev1 » Mar 6 Juin 2017 09:42

JacquesZ a écrit:
kev1 a écrit:
Pour les gauges:
Un écran tv 55cm, avec les gauges de airmanager : la fluidité des gauges sont satisfaisantes mais quelques détails me chagrinent un peu ( pas de on/off sur la radio, l'horizon artificiel du B3 n'existe pas chez airmanager, la bille ne correspond pas à la position de l'appareil, )


Kev1


Super boulot Kevin! Le panel a l'air d'être fait avec du Kadapak (carton plume) je me trompe?

Quelle tête a le "vrai" horizon artificiel du B3, tu as une photo?
Et ton histoire de bille je ne comprends pas.

L'avantage d'Air Manager, c'est que tu peux créer les jauges que tu veux, comme tu veux! par exemple rajouter la fonction on/off si elle manque sur ta radio.

Sinon il y a déjà un HSI 'achement mieux que celui que tu utilises (normal, c'est moi qui l'ai fait lunettesnoires ): le Bendix King KI525, dispo gratuitement sur le store. Cherches dans GENERIC HSI KI 525A
Image

Et j'ai fait un horizon, Bendix King aussi le KI 256. Je l'ai pas encore soumis au store, car il n'est pas tout à fait finalisé (il manque les fonctions FD), mais si tu le veux je te le fais passer. Il y aura deux version, une électrique, l'autre pneumatique, et même les versions sans FD avec la maquette réglable.
Image

Les deux instruments sont compatibles FSX/P3D et XPlane, on peut même enlever les bezels pour les cockpits hardware comme le tien.
Image

Jacques



C est vrai qu'il est beau ton HSI!! applaublanc Je vais l essayer.
Le TDB, je l'ai fais avec "je sais plus le nom". gratgrat c'est tout léger, ça se travail facilement. c'est moins cher que le contreplaqué. ( C'est de la fibre végétale compressée je crois).
Pour ce qui est de l'indicateur de virage, je m'explique. J'ai pas la photo sous la main mais celui du B3 de dreamfoil est intégré dans l'horizon artificiel comme celui du BARON B58 . Mais quand je vole, j'ai la sensation que la position de la bille ne correspond pas à la position réel de l'appareil. ( bille au centre = vole en crabe). L'autre solution serait de remplacer mon radioaltimètre par un indicateur de virage et de remplacer mon horizon actuel par un autre.
Je me suis pas encore penché sur la conception des gauges chez airmanager malheureusement.... mais je vais regarder.
merci Jacques pour ton aide!
asus gamer portable/ intel core I7-4710HQ CPU 2.5Ghz / 16 Go RAM /wind 8.1/ Carte Geforce GTX860M/
kev1
 
Messages: 12
Inscription: 30/06/16

Re: cockpit as350

Messagede arcc » Mar 6 Juin 2017 18:59

Bonsoir

Les deux instruments sont compatibles FSX/P3D et XPlane, on peut même enlever les bezels pour les cockpits hardware comme le tien.


Je rebondis sur les messages précèdent. Ton HSI est vraiment superbe, par contre, si j'ai bien reussi à enlever le "Bezel" et les vis, je ne sais pas comment retirer les deux "boutons" (dialhsi et headingbug) dans le script.
J'ai trouver les lignes
Code: Tout sélectionner
-- DIAL ADD --
dial_OBS = dial_add("dialhsi.png", 18, 368, 85, 85, new_obs)
dial_BUG = dial_add("headingbug.png", 409, 368, 85, 85, new_heading)

dial_click_rotate(dial_OBS, 5)
dial_click_rotate(dial_BUG, 5)


On peux les retirer dans le script ou je dois faire une image transparente (en blanc pur ) avec "Skinman" enregistré en .png with alpha.

A+
Christian
Un ancien sous-marinier qui a pris de la hauteur.
Avatar de l’utilisateur
arcc
 
Messages: 715
Inscription: 16/12/13
Localisation: La ou fini la terre (Finistere)

Re: cockpit as350

Messagede JacquesZ » Mar 6 Juin 2017 23:24

arcc a écrit:Bonsoir

Les deux instruments sont compatibles FSX/P3D et XPlane, on peut même enlever les bezels pour les cockpits hardware comme le tien.


Je rebondis sur les messages précèdent. Ton HSI est vraiment superbe, par contre, si j'ai bien reussi à enlever le "Bezel" et les vis, je ne sais pas comment retirer les deux "boutons" (dialhsi et headingbug) dans le script.
J'ai trouver les lignes
Code: Tout sélectionner
-- DIAL ADD --
dial_OBS = dial_add("dialhsi.png", 18, 368, 85, 85, new_obs)
dial_BUG = dial_add("headingbug.png", 409, 368, 85, 85, new_heading)

dial_click_rotate(dial_OBS, 5)
dial_click_rotate(dial_BUG, 5)


On peux les retirer dans le script ou je dois faire une image transparente (en blanc pur ) avec "Skinman" enregistré en .png with alpha.

A+
Christian

Merci Christian

Oui c'est ça il suffit de mettre les quatres lignes suivantes en commentaire en rajoutant deux -- devant chaque ligne.
C'est grossier, mais ça marche.
Je n'ai pas mis cette version de code "customisée" en ligne sur le store, alors la voici spécialement pour vous:
la variable "display_dials" a été rajoutée dans la section customisation, il suffit de la mettre à false pour que les boutons disparaissent également.

Il suffit de copier ce code et de le remplacer intégralement dans le script d'origine.

Code: Tout sélectionner
---------------------------------------------------------------
-- BENDIX/KING CROWN SILVER KING SERIE                       --
-- KI525A HSI (ELECTRICAL)                                   --
-- version 1.3a   
-- (fixed loc Scale position at startup)       
-- (new variable to display or not the Bezel)             
-- J. ZAHAR 04/2016                                          --
-- based on original by MacnFly (Thanks Mac!)                --
-- Modeled using the user manual of the real instrument      --
-- includes failure flags when power OFF                     --
-- FSX and Xplane version 
---------------------------------------------------------------

---------------------------------------------------------------
-- DISPLAY VARIABLES SECTION                                 --
-- Set to True or False according to taste                   --
---------------------------------------------------------------
display_frame=false -- displays the rectangular frame
display_screws=false -- displays the mounting screws
display_bezel=false -- displays the external bezel
display_dials=false -- displays the dials
FSX_HSI_source=0 -- NAV source for the HSI (FSX only!)--> 0:NAV1, 1:NAV2, 2:GPS (no GS)
gyro_spinup_duration=15000 -- time (in msec) before elec gyro is at full speed when master switch has been switched ON (default 10-15  sec)
---------------------------------------------------------------
-- END OF DISPLAY VARIABLES SECTION                          --
-- DO NOT MODIFIY CODE PAST THIS POINT !!!                   --
---------------------------------------------------------------
-- Global variables
is_failed=false
gbl_cur_hdef=0
gbl_cur_vdef=119
gbl_cur_bearing=0
gbl_target_hdef=0
gbl_target_vdef=20
gbl_target_bearing=0
gbl_factor1= 0.25
gbl_factor2= 0.25
gbl_factor3= 0.3
-- DIAL FUNCTIONS --
function new_obs(obsset)

   if obsset == -1 then
   if FSX_HSI_source==0 then --NAV1
      xpl_command("sim/radios/obs1_down")
      fsx_event("VOR1_OBI_DEC")
      end
   if FSX_HSI_source==1 then -- NAV2
      xpl_command("sim/radios/obs2_down")
      fsx_event("VOR2_OBI_DEC")
      end
   if FSX_HSI_source==2 then -- GPS
      xpl_command("sim/radios/obs1_down")
      fsx_event("VOR1_OBI_DEC")
      end
   elseif obsset == 1 then
   if FSX_HSI_source==0 then
      xpl_command("sim/radios/obs1_up")
      fsx_event("VOR1_OBI_INC")
      end
   if FSX_HSI_source==1 then
      xpl_command("sim/radios/obs2_up")
      fsx_event("VOR2_OBI_INC")
      end
   if FSX_HSI_source==2 then
      xpl_command("sim/radios/obs1_up")
      fsx_event("VOR1_OBI_INC")
      end
   end
end

function new_heading(headingset)

   if headingset == -1 then
      xpl_command("sim/autopilot/heading_down")
      fsx_event("HEADING_BUG_DEC")
   elseif headingset == 1 then
      xpl_command("sim/autopilot/heading_up")
      fsx_event("HEADING_BUG_INC")
      end
   
end
-- GRAPHICS --
if display_frame==true then
   img_add_fullscreen("HSI_background frame.png")
end
img_add_fullscreen("HSI_background.png")
img_rose = img_add_fullscreen("HSI_compas rose.png")
img_bug = img_add_fullscreen("HSI_headingbug.png")
img_neddle = img_add_fullscreen("HSI_Needle arrow.png")
img_center_to = img_add_fullscreen("HSI_to flag.png")
img_center_from = img_add_fullscreen("HSI_from flag.png")
img_center = img_add_fullscreen("HSI_loc scale.png")
img_center_neddle = img_add_fullscreen("HSI_Needle center.png")
img_hdg_flag = img_add_fullscreen("HSI_flag HDG right.png")
img_nav_flag = img_add_fullscreen("HSI_flag NAV left.png")
img_add_fullscreen("HSI_inner bezel.png")
img_glideslope_markers = img_add_fullscreen("HSI_ILS bugs.png")--,0,-100,512,512)
img_add_fullscreen("HSI_inner bezel2.png")
if display_screws==true then
   img_add_fullscreen("HSI_Bezel ext.png")
end
   if display_screws==true then
   img_add_fullscreen("HSI_screws.png")
end
--img_add_fullscreen("HSIguidelines.png")--guidelines (used for debugging)
-- Default visibility --
visible(img_hdg_flag, false)
visible(img_nav_flag, false)

-- FUNCTIONS --
function removes_HDG_flag() -- removes NAV flag after gyro_spinup_duration
visible(img_hdg_flag, false)
end

function PT_hsi(heading,source,crs,nav1hdef,nav2hdef,gpshdef,nav1vdef,nav2vdef,
                gpsvdef,nav1display,nav2display, glideslopeflag, headingbug, nav1_fromto, nav2_fromto, gps_fromto, failed,has_power)
-- HDG flag
if (failed==1 or has_power==0) then --partial panel failure or master switch is off or main electrical bus is off
      visible(img_hdg_flag,true)-- show HDG flag immediately
      visible(img_nav_flag, true )
      is_failed=true --instrument is off
   else -- power is on
   if is_failed==true then -- gauge powering up? we start a timer to let the gyro spinning before removing the flag
      running=timer_running(gyro_startup_timer) -- if timer is already started do nothing
      if running==false then
         gyro_startup_timer=timer_start(gyro_spinup_duration,nil,removes_HDG_flag)--wait for gyro_spinup_duration before removing flag
      end
      is_failed=false
   end
    -- gbl_cur_bearing=gbl_target_bearing
end
if is_failed==true then --instrument is powered off
   nav1display=0
   nav2display=0
   nav1hdef=0
   nav1vdef=0
   nav1_fromto=0
   nav2hdef=0
   nav2vdef=0
   nav2_fromto=0
   gpshdef=0
   gpsvdef=0
   gps_fromto=0
   glideslopeflag=0
    gbl_target_bearing=gbl_cur_bearing
end--if is_failed
-- global variables setting before calling of timer_callback()
   gbl_target_bearing=-heading+crs
   gbl_target_bug=headingbug   
   -- Rotate compas card
   img_rotate(img_rose, -heading)
   -- Rotate heading bug
   img_rotate(img_bug, headingbug - heading)
   img_rotate(img_center, gbl_target_bearing)
   img_rotate(img_center_to, gbl_target_bearing)
   img_rotate(img_center_from, gbl_target_bearing)
   

if source == 0 then -- NAV1
   gbl_target_hdef=nav1hdef
   gbl_target_vdef=nav1vdef
end   

if source == 1 then -- NAV2
    gbl_target_hdef=nav2hdef
   gbl_target_vdef=nav2vdef
end
   
if source == 2 then -- GPS
    gbl_target_hdef=gpshdef
   gbl_target_vdef=gpsvdef
end
   -- flags to/from
   to = ((source == 0 and nav1_fromto == 1) or (source == 1 and nav2_fromto == 1) or (source == 2 and gps_fromto == 1))
   from = ((source == 0 and nav1_fromto == 2) or (source == 1 and nav2_fromto == 2) or (source == 2 and gps_fromto == 2))
   visible(img_center_to, (to == true and glideslopeflag==0))
   visible(img_center_from, (from == true and glideslopeflag==0))

   -- GS bugs
   if glideslopeflag == 1 then -- GS signal received
   --visible(img_glideslope_markers, true)
   --gbl_target_vdef=-2
   else
   --visible(img_glideslope_markers, false)
   gbl_target_vdef=-3.5 -- sends the bugs out of view
   end

-- NAV flag when no valid VOR or localizer
   visible(img_nav_flag, (source == 0 and nav1display == 0) or (source == 1 and nav2display == 0))
   

   
end

-- function to slowly move CDI center needle to current CDI deviation --
-- Thanks Ralph and Corjan for the trick!                             --
 function timer_callback()
    -- CDI needle
   img_rotate(img_neddle, gbl_cur_bearing)
    img_rotate(img_center_neddle, gbl_cur_bearing)
   -- Calculation of center CDI needle position in pixels according to current needle bearing (actually bearing=course-heading)
   navhdef = var_cap(gbl_cur_hdef, -4, 2.5) --horizontal deflection of CDI needle in ° (-2.5,2.5°)
    dh = navhdef  * math.cos((gbl_cur_bearing)*math.pi/180)* 41 -- 41 : distance in pixels between 2 dots
    dv = navhdef * math.sin((gbl_cur_bearing)*math.pi/180)* 41
     --Move center CDI needle
   move(img_center_neddle, dh, dv, nil, nil)
   --Move GS needle
   navvdef = var_cap(gbl_cur_vdef, -4, 4)--vertical deflection of GS bugs in °
   --dm = (navvdef * 41)-119 -- 40 : distance in pixels between 2 vertical dots
   dm = (navvdef * 41) -- 40 : distance in pixels between 2 vertical dots
    move(img_glideslope_markers, nil, dm , nil, nil)
   
    --Calculation of current CDI deflection in ° with respect to target deflection position
   -- currrent position is decreased/increased by "gbl_factor" every function call until reaching target position within 0.001 degrees
    raw_diff = (gbl_target_hdef - gbl_cur_hdef) -- compute the delta of position
    diff = fif(raw_diff,raw_diff,(raw_diff)*-1) -- chooses the sign of delta
    gbl_cur_hdef = fif(math.abs(diff) < 0.001, gbl_target_hdef, gbl_cur_hdef + (diff * gbl_factor1) )-- chooses the greatest value
     --Calculation of current GS deflection in ° with respect to target deflection position
   raw_diff = (gbl_target_vdef - gbl_cur_vdef)
    diff = fif(raw_diff,raw_diff, (raw_diff) * -1)
    gbl_cur_vdef = fif(math.abs(diff) < 0.001, gbl_target_vdef, gbl_cur_vdef + (diff * gbl_factor2) )
   -------------
   gbl_cur_bearing=gbl_target_bearing
   -- calculation for rotating needle (unused)
    -- raw_diff = (360 + gbl_target_heading - gbl_cur_heading) %360
    -- diff = fif(raw_diff < 180, raw_diff, (360 - raw_diff) * -1)
    -- gbl_cur_heading = fif(math.abs(diff) < 0.001, gbl_target_heading, gbl_cur_heading + (diff * gbl_factor3) )
 end

 -- function to adapt FSX parameters to Xplane function
function PT_hsi_FSX(heading, obs, vertical, horizontal, nav_fromto, has_glide,  headingbug,  partial_panel, master)
   if (master==false ) then
         has_bus_power=0
      else
         has_bus_power=1
      end
      if (partial_panel==1) then
         fail=1
      else
         fail=0
      end
      
   glideslope = fif(has_glide, 1, 0)   --from FSX boolean to integer (Xplane style)
   vertical = 2 / 119 * vertical -- GS range from -119 to + 119 in FSX
   horizontal = 2 / 127 * horizontal -- CDI range from -127 to + 127 in FSX

   PT_hsi(heading, 0, obs, horizontal, 0, 0, vertical, 0, 0, nav_fromto, 0, glideslope, headingbug, nav_fromto, 0, 0, fail,has_bus_power)
--function PT_hsi(heading,source,crs,nav1hdef,nav2hdef,gpshdef,nav1vdef,nav2vdef,gpsvdef,nav1display,nav2display, glideslopeflag, headingbug, nav1_fromto, nav2_fromto, gps_fromto, fail,has_bus_power)
end

-- DIAL ADD --
if display_dials==true then
   dial_OBS = dial_add("dialhsi.png", 18, 368, 85, 85, new_obs)
   dial_BUG = dial_add("headingbug.png", 409, 368, 85, 85, new_heading)

   dial_click_rotate(dial_OBS, 5)
   dial_click_rotate(dial_BUG, 5)
end
if FSX_HSI_source==0 then -- NAV1 (default)
fsx_variable_subscribe("HEADING INDICATOR", "Degrees",--"PLANE HEADING DEGREES GYRO", "Degrees",
                  "NAV OBS:1", "Degrees",
                  "NAV GSI:1", "Number",
                  "NAV CDI:1", "Number",                   
                  "NAV TOFROM:1", "Enum",    
                  "NAV HAS GLIDE SLOPE:1", "Bool",
                  "AUTOPILOT HEADING LOCK DIR", "Degrees",
                  "PARTIAL PANEL ELECTRICAL", "Enum",-- failure of electrical bus
                  "ELECTRICAL MASTER BATTERY","Bool",PT_hsi_FSX)-- master switch
end
if FSX_HSI_source==1 then -- NAV2
fsx_variable_subscribe("HEADING INDICATOR", "Degrees",--"PLANE HEADING DEGREES GYRO", "Degrees",
                  "NAV OBS:2", "Degrees",
                  "NAV GSI:2", "Number",
                  "NAV CDI:2", "Number",                   
                  "NAV TOFROM:2", "Enum",    
                  "NAV HAS GLIDE SLOPE:2", "Bool",
                  "AUTOPILOT HEADING LOCK DIR", "Degrees",
                  "PARTIAL PANEL ELECTRICAL", "Enum",-- failure of electrical bus
                  "ELECTRICAL MASTER BATTERY","Bool",PT_hsi_FSX)-- master switch
end
if FSX_HSI_source==2 then -- GPS
fsx_variable_subscribe("HEADING INDICATOR", "Degrees",--"PLANE HEADING DEGREES GYRO", "Degrees",
                  "NAV OBS:1", "Degrees",
                  "HSI GSI NEEDLE", "Number",
                  "HSI CDI NEEDLE", "Number",                   
                  "HSI TF FLAGS", "Enum",    
                  "HSI GSI NEEDLE VALID", "Bool",
                  "AUTOPILOT HEADING LOCK DIR", "Degrees",
                  "PARTIAL PANEL ELECTRICAL", "Enum",-- failure of electrical bus
                  "ELECTRICAL MASTER BATTERY","Bool",PT_hsi_FSX)-- master switch
end
xpl_dataref_subscribe("sim/cockpit2/gauges/indicators/heading_electric_deg_mag_pilot", "FLOAT",-- electrical, not vacuum
                 "sim/cockpit2/radios/actuators/HSI_source_select_pilot", "INT",
                 "sim/cockpit2/radios/actuators/hsi_obs_deg_mag_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/nav1_hdef_dots_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/nav2_hdef_dots_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/gps_hdef_dots_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/nav1_vdef_dots_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/nav2_vdef_dots_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/gps_vdef_dots_pilot", "FLOAT",
                 "sim/cockpit2/radios/indicators/nav1_display_horizontal", "INT",
                 "sim/cockpit2/radios/indicators/nav2_display_horizontal", "INT",
                 "sim/cockpit2/radios/indicators/hsi_display_horizontal_pilot", "INT",
                 "sim/cockpit2/autopilot/heading_dial_deg_mag_pilot", "FLOAT",
                 "sim/cockpit/radios/nav1_fromto", "INT",
                 "sim/cockpit/radios/nav2_fromto", "INT",
                 "sim/cockpit/radios/gps_fromto", "INT",
                 "sim/operations/failures/rel_esys","INT", -- failure of main bus
                 "sim/cockpit/electrical/battery_on", "INT", PT_hsi) -- master switch on
                
 -- Timers
 -- Thanks Ralph and Corjan for the trick!--
tmr_update = timer_start(0, 50,timer_callback)-- moves the CDI needle every 0.05 second   by calling the timer_callback() function

A noter:
le HSI peut être commandé par NAV1, NAV2 ou le GPS via une variable située également dans le code (FSX_HSI_source) pour FSX/P3D au moins, pour XPlane il existe déjà un offset qui gère ça.
Il y a également une temporisation pour simuler le temps de recalage du gyro (cela prend une quizaine de secondes avant qu'il arrive à pleine vitesse), que l'on peut annuler si on met la valeur à 0.

Quand j'aurais le temps je ferais un sélecteur couplé avec un annonciateur comme une jauge indépendante pour pouvoir changer la source du HSI depuis le Tdb comme le fait FSX, mais là je suis en plein prépa pour mes deux derniers exams, Préparation et suivi du vol (les cartes! et les abaques!) et Procédures opérationnelles.

Jacques
Ma chaîne YouTube Tutos sur l’A320 par un Pilote de Ligne: https://youtube.com/channel/UCljftuoKBcgeR-WBgYJpuoA
Avatar de l’utilisateur
JacquesZ
 
Messages: 2848
Inscription: 24/11/10

Re: cockpit as350

Messagede arcc » Mer 7 Juin 2017 18:58

Ah bon si tu fais tout à notre place... Super. Je m'en vais placer ca dans mon Pc Client; Merci bien et bon courage pour tes exams.Désolé Kev d'avoir légèrement "pollué" ton topic.

A+
Christian
Un ancien sous-marinier qui a pris de la hauteur.
Avatar de l’utilisateur
arcc
 
Messages: 715
Inscription: 16/12/13
Localisation: La ou fini la terre (Finistere)

Re: cockpit as350

Messagede JacquesZ » Mer 7 Juin 2017 19:40

Ben en fait c'était déjà fait, j'avais juste pas publié la nouvelle version sur le store d'Air manager!
Ma chaîne YouTube Tutos sur l’A320 par un Pilote de Ligne: https://youtube.com/channel/UCljftuoKBcgeR-WBgYJpuoA
Avatar de l’utilisateur
JacquesZ
 
Messages: 2848
Inscription: 24/11/10

Re: cockpit as350

Messagede kev1 » Mer 7 Juin 2017 21:49

arcc a écrit:Ah bon si tu fais tout à notre place... Super. Je m'en vais placer ca dans mon Pc Client; Merci bien et bon courage pour tes exams.Désolé Kev d'avoir légèrement "pollué" ton topic.

A+
Christian


Salut !

C'est pas grave que ça dérive! çà ouvre des portes!

J'ai essayé ton HSI mais il ne fonctionne pas bien chez moi. Je n'ai pas pu approfondir car j'ai un problème de câble minidisplay qui vient de s'ajouter. murrouge

J'ai aussi pu vérifier que mon indicateur de virage (baron b58) (intégré à l'horizon artificiel ) ne correspond pas a celui du b3. J'ai essayé d'autres indicateur de virage (avion) mais ils ne correspondent pas non plus.
Je devrait me pencher sur la programmation airmanger?

A part ça, je voudrais me faire faire un PC dédié au simu. Si quelqu'un a une bonne adresse pour ce faire faire un Pc de AàZ je suis preneur. !!
asus gamer portable/ intel core I7-4710HQ CPU 2.5Ghz / 16 Go RAM /wind 8.1/ Carte Geforce GTX860M/
kev1
 
Messages: 12
Inscription: 30/06/16

Re: cockpit as350

Messagede JacquesZ » Mer 7 Juin 2017 23:57

kev1 a écrit:
arcc a écrit:Ah bon si tu fais tout à notre place... Super. Je m'en vais placer ca dans mon Pc Client; Merci bien et bon courage pour tes exams.Désolé Kev d'avoir légèrement "pollué" ton topic.

A+
Christian


Salut !

C'est pas grave que ça dérive! çà ouvre des portes!

J'ai essayé ton HSI mais il ne fonctionne pas bien chez moi. Je n'ai pas pu approfondir car j'ai un problème de câble minidisplay qui vient de s'ajouter. murrouge

J'ai aussi pu vérifier que mon indicateur de virage (baron b58) (intégré à l'horizon artificiel ) ne correspond pas a celui du b3. J'ai essayé d'autres indicateur de virage (avion) mais ils ne correspondent pas non plus.
Je devrait me pencher sur la programmation airmanger?

A part ça, je voudrais me faire faire un PC dédié au simu. Si quelqu'un a une bonne adresse pour ce faire faire un Pc de AàZ je suis preneur. !!

Ah? c'est la première fois qu'on me dit que le HSI ne fonctionne pas. Tu est sur XPane 10?
Je l'ai surtout développé à la base pour FSX, je ne l'ai pas intensivement testé sur XP10. Dis moi les problèmes rencontrés, j'y jetterai un oeuil.

Pour ton problème de bille, je pense plutôt que c'est le Dreamfoil qui a un soucis avec la bille, si toutes les billes ont le même problème. Cela semble confirmé par la liste des bugs corrigés par le fameux SP2 justement...

Sinon si tu veux commander toi même tes pièces pour un PC customisé, Matériel.Net et RueMontgallet.com sont des valeurs sûres. Chez Matériel.net ils te font l'assemblage selon tes besoins, et il y a souvent un point de retrait pas loin de chez toi, à voir sur leur site. Ceci dit, ils ont plein de PC Gamer déjà montés qui seront parfaits pour XPlane, c'est probablement moins cher au final.

Jacques
Ma chaîne YouTube Tutos sur l’A320 par un Pilote de Ligne: https://youtube.com/channel/UCljftuoKBcgeR-WBgYJpuoA
Avatar de l’utilisateur
JacquesZ
 
Messages: 2848
Inscription: 24/11/10

Précédente

Retourner vers Cabines de simulateurs





Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 4 invités