de cgoa-benoit » Dim 5 Juil 2015 13:31
Le fichier sioc.ini:
[ Configuration file for SIOC ver. 5.0 ]
[************** SIOC ***************]
[ SIOC name ]
Name=MAIN_SIOC
[ IOCP port ]
IOCP_port=8092
[ IOCP Timeout ]
IOCP_timeout=3500
[ Start minimized in tray ]
Minimized=No
[ Deley needed for var. toggles (Project Magenta) ]
Toggle_delay=20
[ Configuration File ]
Config_File=F:\Program Files (x86)\IOCards\SIOC\sioc.ssi
[************** VIRTUAL DEVICES ***************]
[ Enable Receive Virtual Devices yes/no ]
Vdevices_enable=No
[ Wait time for load Virtual Devices (ms)]
Vdevices_wait=2000
[ Slave mode for SIOC Virtual Devices Server yes/no ]
Vdevices_slave=No
[ SIOC Host/Port to resent Devices ]
Vdevices_host=192.168.1.5
Vdevices_port=8092
[************** MONITOR MODULE ***************]
[ Remote monitor disable mode yes/no ]
Monitor_disable=No
[ Broadcast monitor time (seconds) ]
Monitor_time=2
[************** IOCARDS MODULE ***************]
[ Disable IOCards module ]
IOCard_disable=No
[ Frequency divisor for delay the analogic axes. (1-999)]
Divisor_AD=10
[------------- CARDS CONFIG -------------]
[ IOCard Master ]
[...............]
[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]
[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]
[ type = 0 : Master Card Emulator // OBSOLETE ]
[ type = 1 : Master Card connected directly to parallel port // OBSOLETE ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port //OBSOLETE]
[ type = 3 : Expansion Card connected throught parallel port //OBSOLETE ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]
[ type = 6 : USBOutputs Card used ]
[ type = 7 : EFIS module ]
[ type = 8 : Radio COM module ]
[ type = 9 : Radio NAV module ]
[ type = 10 : Radio ADF module ]
[ type = 11 : Radio ATC module ]
[ type = 12 : Radio RMP Airbus module ]
[ type = 13 : FMC-737 module ]
[ type = 14 : USBDCmotorPLUS Card used ]
[ type = 15 : MCP V3 module ]
[ type = 16 : CHRONO B737 module ]
[ tipo = 17 : USBDimcontrol card used ]
[ tipo = 18 : Audio B737 module ]
[ tipo = 19 : FIRE ENGINES B737 module ]
[ tipo = 20 : PEDESTAL B737 module ]
[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]
[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]
[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]
[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]
[ Use the first USBExpansion card connected with only one Master Card attached ]
[MASTER=3,6,1,252]
[MASTER=0,4,1,0]
[MASTER=0,12,1,0]
[MASTER=20,20,2,1055]
master=0,4,1,0
[ Others Cards / Otras tarjetas ]
[...............................]
[ English : ]
[ Name_of_card=(Device index),(Device number) ]
[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]
[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]
[ USBServos=0,17 ]
[ USBServos=1,23 ]
[USBStepper=0,0]
[USBKeys=0,0]
[USBServos=0,0]
[USBRelays=0,0]
[USBDCmotor=0,0]
[ For analogic axles, you use the device number of cards what allow the axles ]
[USBAnalogic=0,0]
[************** FSUIPC MODULE ***************]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No
[ FSUIPC refresh ]
FSUipcRefresh=50
[************** IOCP CLIENTS MODULES ***************]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=0
[************** IOCP CLIENT MODULE #0 ***************]
[ Disable IOCP client module ]
IOCPclient0_disable=Yes
[ IOCP client host name ]
IOCPclient0_host=LOCALHOST
[ IOCP client port ]
IOCPclient0_port=8099
[************** IOCP CLIENT MODULE #1 ***************]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes
[ IOCP client host name ]
IOCPclient1_host=LOCALHOST
[ IOCP client port ]
IOCPclient1_port=8099
[************** SOUND MODULE ***************]
[ Sound Files ]
[ Disable Sound module ]
Sound_disable=Yes
[ Master Volume 0-100 ]
Volume=100
[ put '*' first filename for loop Sound ]
[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]
[ #1 ]
Sound=APDis.wav,-1,-1,-1
[ #2 ]
Sound=*outermk.wav,-1,-1,-1
[ #3 ]
Sound=*hello.wav
[************** KEYBOARD EMULATOR MODULE ***************]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]
window =a.txt - Bloc de notas
[ assign youe keys ]
#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=/0
#45=/1
#46=/A
#47=<T
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=<a
#200=B
J'ai enlevé l'espagnol, c'est plus clair comme çà !
Dernière édition par
cgoa-benoit le Dim 5 Juil 2015 14:45, édité 2 fois.